Packaging Vibration Test Shaker for Transport Simulation
A packaging vibration test shaker is equipment used to apply controlled mechanical vibration to packaged products and shipping units during packaging development and transport simulation. TestLabs supplies packaging vibration test machines for cartons, crates and custom-designed cases in Malaysia, with configuration options to be confirmed against the product, package, payload, fixture and applicable test plan. Request the current specification and a quotation before selecting the machine configuration.
✳︎
Local Technical Support
✳︎
1 Year Local Warranty
✳︎
Free Training
✳︎ Local Technical Support ✳︎ 1 Year Local Warranty ✳︎ Free Training
Packaging Vibration Test Machine for Malaysia
Packaging vibration testing is used to expose a packaged product or shipping unit to a specified vibration condition so that packaging design, product protection and transport-related risks can be evaluated. A vibration shaker can support packaging development, packaging redesign, investigation of transit damage and customer-requested testing, provided that the equipment configuration matches the intended test method.
The test item may be a carton, cardboard box, crate, custom case or another shipping unit. The suitable fixture, table area, payload, vibration mode, control method, frequency or speed range and test duration depend on the product and the buyer’s test plan. TestLabs can review these requirements and recommend the information needed for a quotation.
For customers in Kuala Lumpur, Selangor, Penang, Johor and other parts of Malaysia, ask TestLabs to confirm current availability, delivery scope, installation or service arrangements, and the final machine configuration. Singapore and wider Asia enquiries can also be directed to the sales team when regional supply or support is required.
Applications for packaging and shipping units
A packaging vibration test shaker may be considered for the following stages of a product and packaging cycle:
•New packaging development: Compare early packaging concepts and identify weaknesses before routine shipment.
•Packaging redesign: Review the effect of a new carton, insert, cushioning material, pallet arrangement or case design.
•Transit-damage investigation: Reproduce an agreed vibration condition when a product or package has been damaged during transportation.
•Customer or procurement requirements: Prepare for a customer-specified packaging test plan after confirming the required procedure and acceptance criteria.
•Quality and reliability programmes: Use a repeatable machine setup for internal packaging-development or quality-control work when the test method and reporting process are defined.
Key Features and Specifications
| Parameter | Published reference value |
|---|---|
| Maximum test load | 100 kg |
| Frequency range | 60–300 rpm |
| Amplitude range | 25.4 mm (1 inch) |
| Vibration mode | Roundtrip |
| Simulation speed | 25–40 km/h |
| Work table size | 1000 × 1200 mm |
| Outside dimensions (L × W × H) | 1255 × 1070 × 660 mm |
| Power capacity | 1 HP |
| Machine weight | 125 kg |
| Environmental conditions | Temperature: 5–40 °C; relative humidity: <85% |
| Speed mode | DC converter or AC frequency control |
| Power supply | 220 V, 50 Hz |
Configuration note: These values are transcribed from the specification visual currently displayed on the page and are not a substitute for a quotation or test-method review. Confirm payload, fixture, motion/profile, controls, power supply, dimensions, environmental limits and any customization with TestLabs before purchase.
TestLabs can review applications involving an applicable ISTA procedure, ASTM practice, MIL-STD method, EN requirement or customer-specific profile. Final suitability, current revision, fixture, payload and test settings must be confirmed before purchase or testing.
Frequently Asked Questions
What is a packaging vibration test shaker?
A packaging vibration test shaker is equipment that applies controlled mechanical vibration to a packaged product or shipping unit. It is used for packaging development, packaging redesign, transport simulation and investigation of possible transit damage, subject to the selected test method and machine configuration.
What types of packaging can be tested?
The current page describes applications for cartons, cardboard boxes, crates and custom-designed cases. The final package dimensions, orientation, weight, payload, fixture and restraint method should be reviewed before quotation to confirm that the equipment is suitable for the intended shipping unit.
Can the machine be used for an ISTA or ASTM packaging test?
TestLabs can review an enquiry that refers to an applicable ISTA procedure, ASTM practice, MIL-STD method, EN requirement or customer-specific transport profile. A standards reference does not by itself certify a machine or a package. The applicable procedure and revision, vibration profile, fixture, payload, controls, sequence and acceptance criteria must be confirmed before purchase or testing.
Can the packaging vibration test machine be customized?
Customization should be reviewed against the package, payload, table area, fixture, vibration mode or profile, control method, power supply and installation requirements. The current page indicates that customization is available, but the final scope, price and delivery arrangement must be confirmed for the requested configuration.
What information should I provide for a quotation?
Send the product type, package type, package length, width and height, total package weight, maximum payload, required frequency or vibration profile, applicable standard or customer method, fixture requirements, power supply, delivery location and any service or customization needs. Email sales@testlabs.my or contact TestLabs on +6018-2030306
Where does TestLabs supply packaging vibration test equipment?
TestLabs is based in Kuala Lumpur and serves customers in Malaysia, including enquiries from Selangor, Penang and Johor. Singapore and wider Asia enquiries can be directed to the sales team so that current supply, delivery, installation and service scope can be confirmed.
Is TestLabs supplying the machine or performing the packaging test?
This page is focused on packaging vibration test equipment. If you need a testing service instead of a machine, describe the package and the required test method when contacting TestLabs so the team can confirm the appropriate service or equipment route.
Installation, training and after-sales support
TestLabs supports customers in Malaysia, including projects in Kuala Lumpur, Selangor, Penang, and Johor, subject to project scope and delivery location. Discuss site access, floor space, electrical supply, lifting or unloading arrangements, operator training, safety controls, calibration expectations, and after-sales support during the quotation process. Singapore and wider Asia enquiries can also be assessed when the project requirements and logistics are clear.
Request a Quotation
Tell us what you need to test, purchase, or implement. Please include the product or material, specimen dimensions, approximate weight, required test level, applicable standard or test method.
We will review the information and advise on the next step or the details that still need to be confirmed.