HAIDA | Thermal Shock Chamber - TESTLABS.MY | PRODUCT TESTING, ISO CERTIFICATION AND TESTING EQUIPMENT

Thermal Shock Chamber/ Hot Cold Temperature Shock Chamber

Download product brochure: Thermal Shock Chamber.pdf

Haida's Programmable Thermal Shock Chamber , also as Hot Cold Temperature Shock Chamber ,can be used in testing composite material and material structure's result which under continuous environment with high temperature or low temperature shock in short time; it means this product can test the material's chemical change or physics change by expansion and contraction within short time. and Thermal Shock Chamber application to metal, plastic, rubber, electronic etc materials and can be used for product improvement's reference.

In Haida's Thermal Shock Chamber, hot and cold impact box can be repeated quickly and autonomously to the pattern in the cold and hot environment between the hot and cold cycle test. Equipment can quickly and accurately create a hot and cold environment with -40~175°c temperatures ranges.

Usage:
Generally used in electronics, semiconductor, pharmaceutical, chemical, cosmetics, paint, oil,color,photo,food and other industries and universities, inspection and quarantine bureau, commodity inspection, drug testing, military academy and other research mechanism.

Features:
1. Perfect appearance and easy to operate.
2. Imported LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.
3. Two chamber structures, high temperature chamber and low temperature chamber, control automatically, stay and switch time adjustable.
4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…
5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.
6. Cold and hot shock temperature recover within1 minute, which complies with MTL, IEC, JIS, GJB and other international standards.

Main parameters:

Corresponding standard:
1,GB/T2423.1-1989 low-temperature testing method
2,GB/T2423.2-1989 high-temperature testing method
3,GB/T2423.22-1989  change temperature test
4,GJB150.5-86  temperature impact test
5,GJB360.7-87  temperature impact test
6,GJB367.2-87 405 temperature impact test

High temperature chamber:

Including three parts: heater, draught fan and air duct valve
Draught fan cyclically stirs hot air through heater
The basket with testing product drive to high temperature range when doing high temperature impact test.

Low temperature chamber:

Including four parts: evaporator, energy storage piece, draught fan and air duct valve
Draught fan cyclically stirs cold air through evaporator and energy storage piece.
The basket with testing product drive to low temperature range when doing low temperature impact test.

Drive device:

Pneumatic cylinder: drive basket with testing product to high and low temperature chamber
Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)

Refrigerating device:

Cooling system: complex overlapping efficient cryogenic loop system
Compressor: Bock compressor
Refrigerant: environmental protection refrigerant R23/R404A
Condensation: Stainless steel welded plate heat exchanger

Controller:

Operate interface: 6" color PLC controller, touch screen
Program memory capacity: 100 groups (modify by operator)
Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 9999cycles
Resolution: temperature: 0.01 ℃
Input: T thermocouple
Control method: PID auto calculation control

Additional functions:

Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test time
Standard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel.

Safety device: